Eminence Lil' Buddy 10" Guitar Replacement Speaker (Patriot Series) A clean and full tone, slow to break-up, but crunchy when driven. Smoother and less defined than many 10 guitar speakers. | LIL' BUDDY™ | | | SPECIFICATION | | | Nominal Basket Diameter | 10 , 254mm | | Nominal Impedance* | 8 ohms | | Power Rating | |  Watts | 50W | | Music Program | | | Resonance | 149Hz | | Usable Frequency Range | 80Hz-5kHz | | Sensitivity*** | 99.1 | | Magnet Weight | 30 oz. | | Gap Height | 0.312 , 7.92mm | | Voice Coil Diameter | 1.75 , 44.5mm | | | | | THIELE & SMALL PARAMETERS | | | Resonant Frequency (fs) | 149Hz | | DC Resistance (Re) | 6.31 | | Coil Inductance (Le) | 0.46mH | | Mechanical Q (Qms) | 9.06 | | Electromagnetic Q (Qes) | 0.93 | | Total Q (Qts) | 0.84 | | Compliance Equivalent Volume (Vas) | 10 liters / 0.35 cu. ft. | | Peak Diaphragm Displacement Volume (Vd) | 29cc | | Mechanical Compliance of Suspension (Cms) | 0.05mm/N | | BL Product (BL) | 11.7 T-M | | Diaphram Mass inc. Airload (Mms) | 22 grams | | Efficiency Bandwidth Product (EBP) | 160 | | Maximum Linear Excursion (Xmax) | 0.8mm | | Surface Area of Cone (Sd) | 366.1 cm2 | | Maximum Mechanical Limit (Xlim) | | | | | | MOUNTING INFORMATION | | | Recommended Enclosure | | | Sealed | | | Vented | Acceptable | | Overall Diameter | 10.11 , 256.8mm | | Baffle Hole Diameter | 9.13 , 231.8mm | | Front Sealing Gasket | fitted as standard | | Rear Sealing Gasket | fitted as standard | | Mounting Holes Diameter | 0.23 , 5.7mm | | Mounting Holes B.C. D. | 9.60 , 243.8mm | | Depth | 4.3 , 109mm | | Net Weight | 6.3 lbs., 2.9 kg | | Shipping Weight | 7.4 lbs., 3.4 kg | | | | | MATERIALS OF CONSTRUCTION | | | Coil Construction | Copper voice coil | | Coil Former | Paper former | | Magnet Composition | Ferrite magnet | | Core Details | Non-vented core | | Basket Materials | Pressed steel basket | | Cone Composition | Hemp Cone ™ | | Cone Edge Composition | Paper cone edge | | Dustcap Composition | Zurette dust cap |
|
