Home > Amplifiers > Guitar Amplifiers > Tech 21 Amplifiers > Tech 21 Bronzewood BW-60 Acoustic Guitar Amplifier
Product Categories: Tech 21 Amplifiers  Guitar Amplifiers  Amplifiers 

Next Product >
Tech 21 Bronzewood BW-60 Acoustic Guitar Amplifier
click image to enlarge close	Quantity in Cart: None Code: Tech-21-Bronzewood-60-BW-Acoustic-Amp MSRP: $715 Price: $539.00 The Bronzewood 60 has been discontinued and is no longer available!
	Shipping: This Item Qualifies For Free Shipping on orders over $99!
	Quantity:
Tech 21 Bronzewood 60 Acoustic Guitar Amplifier Dual Channel, 60 Watt Acoustic Combo The Tech 21 Bronzewood 60 was specifically designed to get the very best from your electro-acoustic instruments, while integrating a dedicated microphone channel. The Guitar channel features an adjustable compressor, reverb, active three-band EQ with semi-parametric sweepable mids and SansAmp tube/mic emulation circuitry to remove the harsh harmonics from piezo pickups. The Mic channel has switchable phantom power for condenser microphones, active EQ and mixable reverb. From the Elvis-cool crocodile vinyl covering to the sweet open tone, this is the last word in amps for any acoustic player headed for the stage or studio.       BW60 ADDITIONAL FEATURES Special design 12” speaker and high frequency horn. Mid Shift and Mid EQ controls range from 170Hz to 3kHz, ±16dB respectively. SansAmp XLR Direct Out for stage and studio applications allows you to go direct to any mixing console. For live gigs, you can run directly into the P.A. system. In larger venues, you’ll be able to utilize the P.A. monitors to supplement your stage volume. Full length, 6-spring reverb. A Reverb Mix controls the balance of reverb between the Guitar and Mic channels. Headphone output, which can also be used as a 1/4” direct out. Effect Loop. Footswitch jack that accepts any alternating footswitch to control the Reverb function. An optional factory footswitch is available. SPECIFICATIONS Model Number: BW60 Input Impedance: (Guitar):  4.7M Ohms  (Mic):  3.3k Ohms Nominal Input Level: -20dBu Optimal Output Load: 8 Ohms  Power Output: 60W Effect Loop Input Impedance 1MOhm Maximum Effect Loop Input approx. -10dBm Nominal Effect Loop Output Impedance 1KOhm Nominal Effect Loop Output approx. -10dBu Effect Loop Output Level* 0 to -10dBu Maximum Power Consumption: 120W AC Input Power: (Factory set): 100V, 117V, 220V, 230V, 240V NOTE: AC power cannot be switched. See authorized dealer/distributor for voltage modification information.  Cycles: 50/60 Hz  Speaker: Model #2112-A, Special design 12" / 100W - 8 Ohms Horn: Model #2125-H, Special design / 60W - 8 Ohms Dimensions: 20"w  x 17"h x 11"d Weight: 38 lbs